NICKEL BASE CORED WELDING WIRE
COR®NICKEL	N SERIES FOR NICKEL BASE FABRICATION WIRES

	ALLOY	DESCRIPTION	CLASSIFICATION	PHYSICAL
	N100A	Used for joining Ni-Cr-Fe alloys and dissimilar alloys such as stainless, 9% nickel, and carbon steel.	AWS ENiCrFe-2	80,000 psi tensile min. 30% Elongation min.
	N82 FC	Used for joining Ni-Cr-Fe alloys and for dissimilar alloys such as stainless, MONEL® , and carbon steels. Especially suited of overlay.	AWS ERNiCr-3	80,000 psi tensile min. 30% Elongation min.
	N182 FC	Use for joining Ni-Cr-Fe alloys and for surfacing steel and joints in clad steels	AWS ENiCrFe-3	80,000 psi tensile min. 30% Elongation min.
	N625L FC	Used for joining Ni-Cr-Mo alloys and other nickel alloys for service conditions that require high strength and corrosion resistance.	AWS ENiCrMo-3	100,000 psi tensile min. 25% Elongation min.
	N276 FC	This alloy has excellent resistance to corrosion, also oxidation at high temperatures.	AWS ENiCrMo-4	100,000 psi tensile min. 25% Elongation min.
	N117 FC	Used for applications where optimum strength and oxidation resistance are required above 1500°F up to 2100°F when welding on nickel-chrome -moly alloys.	AWS ENiCrCoMo-1	90,000 psi tensile min. 25% Elongation min.
	N22 FC	Used to join & repair NiCrMo alloys. Will resist stress corrosion cracking, localized corrosion and oxidizing & reducing chemicals and atmospheres.	AWS ENiCrMo-10	100,000 psi tensile min. 25% Elongation min.
	N102 FC	For welding nickel-chrome-molybdenum alloys including Hastelloy X.	AWS ENiCrMo-2	95,000 psi tensile min. 20% Elongation min.
	ENiMo-7	Can combat corrosion especially in the chemical industry.  High Moly content offers protection against pitting & crevice corrosion.	AWS ENiMo-7	110,000 psi tensile min. 25% Elongation min.

                                                                    "MONEL is a trademark of the Inco family of companies"
                                                            "HASTELLOY is a registered trademark of Haynes International, Inc."