CORED WIRES FOR PLANT MAINTENANCE
   
 COR®MAIN 

M SERIES FOR PLANT MAINTENANCE AND REPAIR
          

HomeServicesEquipmentWhat's NewMSDSData Sheet

Forging
Nickel
Stainless
Cobalt
Low Alloys
Hardface
Tool Steel
Electrodes
Solid Wire

 ALLOY

DESCRIPTION

CLASSIFICATION

PHYSICALS
4130 FC Responds to 4130 quench and temper. Also used as a flame-hardening alloy. AISI 4130 type Dependent on heat treatment flame hardens to 52 Rc
4140 FC Responds to 4140 quench and temper. Also used as a flame-hardening alloy. AISI 4140 type Dependent on heat treatment flame hardens to 56 Rc
4340 FC For repair of 4340 when weld metal must respond to same type of heat-treatment. AISI 4340 type Dependent on heat treatment
6150 FC Responds to 6150 quench and temper. Mostly used for flame hardening properties. AISI 6150 type Dependent on heat treatment flame hardens to 62 Rc
8620 FC For repair of 8620 when weld metal must respond to same type of heat-treatment. AISI 8620 type Dependent on heat treatment
F15 FC Excellent combination of strength and toughness. Useful to join high strength low alloy steels. Fe-Ni-Cr-Mo
6% alloy		 15-20 Rc as welded 115,000 psi tensile 68% R.A.
F25 FC Excellent combination of strength and toughness. Useful to join alloy steels such as 4130, 4140 and wearplate. Fe-Ni-Cr-Mo
8% alloy		 25-30 Rc as welded 132,000 psi tensile 60% R.A.
F35 FC Excellent combination of strength and toughness. Useful to join alloy steels such as 4130, 4140 and wearplate. Fe-Ni-Cr-Mo
10% alloy		 32-37 Rc as welded 165,000 psi tensile 52% R.A.
712 FC High Strength and corrosion resistant alloy used for joining dissimilar metals. Fe-Cr-Ni-Mo
40% alloy		 20 Rc as welded 120,000 psi tensile.
68 FC Versatile alloy for joining a variety of tool steels. Retains hardness after tempering when used on alloy steel. Fe-Cr-Ni
15% alloy		 40 Rc as welded 160,000 psi tensile.
11 FC Lower cost nickel containing alloy used to repair cast iron. Fe-Ni-Cr
14% alloy		 30-35 Rc as welded
33 FC 33% Ni alloy used to buildup cast iron and to join cast iron to steel. Fe-Ni-Mn
38% alloy		 15-20 Rc as welded
3301 FC 36% Ni alloy used to buildup cast iron and to join cast iron steel. Fe-Ni-Mn
42% alloy		 15-20 Rc as welded
55 FC 53% Ni alloy used to join and repair cast iron. Ni-Fe-Mn
56% alloy		 15-20 Rc as welded
99 MC 99% Ni alloy for joining and overlay of cast iron. 99% Ni 160 BHN as welded