HARFACING ALLOYS FOR ABRASION AND IMPACT
   
COR®FACE

 H SERIES FOR HARDFACING WEAR RESISTANT ALLOYS
          

HomeServicesEquipmentWhat's NewMSDSData Sheet
Forging
Nickel
Cobalt
Stainless
Low Alloy
Maintenance
Tool Steel
Electrodes
Solid Wire		 ALLOY DESCRIPTION CLASSIFICATION PHYSICALS
9544 FC Weld metal that workhardens rapidly to resist impact and abrasion. Can withstand high heat input with embrittlement. Fe-Cr-Mn
35% alloy		 20 Rc as welded
45+ Rc work hardened
140,000 psi tensile
95 FC Provides a tough deposit that withstands impact as well as an excellent buildup for abrasion resistant alloys. Fe-Mn-Ni-Cr
20% alloy		 20 Rc as welded
45+ Rc work hardened
120,000 psi tensile
9235 FC Economical alloy that provides good abrasion resistance and can be built up without spalling. Fe-Cr-Si
12% alloy		 50-55 Rc as welded
9250 FC Medium carbon. Medium chrome alloy that works well for abrasion and impact Fe-Cr-C
22% alloy		 50-54 Rc as welded
92 FC High carbon, High chrome for severe abrasion. Cross checks every ~1/2" when deposited. Fe-Cr-C
34% alloy		 55-60 Rc as welded
9260 FC High Carbon, High chrome for severe abrasion. Less chrome and more carbon than 92 FC. Fe-Cr-C
29% alloy		 58-61 Rc as welded
9265 FC Complex carbide for extreme abrasion resistance. This is an economical substitute for Tungsten carbide. Fe-Cr-W-Cb-Mo
40% alloy		 62-66 Rc as welded
52 FC For overlay of components subject to abrasion, impact and high compressive loads. 5% Hot Work
Similar to H-12		 52-57 Rc as welded
6201 FC High hardness weld deposit with minimal cracking that withstands severe abrasion. Mo High Speed
tool steel		 60-64 RC as welded
10V FC A Vanadium Carbide alloy that has excellent resistance to fine particle abrasion. Vanadium Carbide 58-63 Rc as welded
97A FC High Hardness Cr Ni Moly alloy that offers excellent resistance to heat, impact and metal to metal wear. Fe-Cr-Mo-Ni 48-52 Rc as welded
55+ Rc work hardened
160 MC Tungsten Carbide tubular wire for maximum resistance to abrasion. Tungsten Carbide
Fe base		 60-65 Rc as welded
163 MC Tungsten Carbide tubular wire in a Nickel matrix. Tungsten Carbide
Ni base		 60-65 Rc as welded
84 MC Ni base alloy to resist corrosion and high stress metal to metal wear at room temperature and elevated temperatures. Used for overlay of plastic extrusion equipment. AWS A5.13, ENiCr-A 35-45 Rc 1-2 pass as welded
85 MC Similar to 84 MC but offers higher hardness AWS A5.13, ENiCr-B 40-50 Rc 1-2 pass as welded
86 MC Higher hardness than 85 MC. Used for screw flight conveyors. AWS A5.13, ENiCr-C 50-60 Rc 1-2 pass as welded