D2 MC

A metal-cored, air hardening AISI D2 alloy available in gas shielded, and TIG wires. The weld deposit is fully heat treatable.

AISI D2

38-42 as welded
58-62 Rc heat-treated

S7 MC

A metal-cored, shock resistant AISI S-7 alloy, and is available in gas shielded, and TIG wires.

AISI S-7

54-58 Rc as welded

H12 MC

A metal-corded, H-12 hot work alloy designed to provide wear resistant deposits. This alloy performs especially well when rebuilding worn edges of hot trim dies.

AISI H-12

50-55 Rc as welded

T67 MC-T

AISI H19

62 FC

M2 high speed tool steel wire. This alloy is available as a metal cored (MC) and as a flux cored (FC) depending on the size. 62 FC yields a crack-free weld deposit which resists abrasion comparably to hardfacing alloys, and maintains hardness at temperatures up to 1100° F.

AISI M-2

59-63 Rc as welded

6201 FC

M series high speed tool steel. This alloy maintains hardness, and resists abrasion at temperatures up to 1100° F.

AISI M-1

59-63 Rc as welded

4130 SWT

Can be used for the repair of 4130 alloys. Can be flame hardened to 50+ Rc.

30-35 Rc as welded

420 SWT

A 400 series martinsitic stainless used for mold and die repair, and repair of 420 stainless.

51-54 Rc as welded

A-2 SWT

For repair and fabrication of air hardening grades of tool steel. Can be used on extrusion dies, blanking dies, punches and trim dies.

50-55 Rc as welded

F54 SWT

Machinable 5% Chrome hot work tool steel. Very suitable for die casting dies, extrusion dies and forging dies.

30-35 Rc as welded

H-12 SWT

Excellent all purpose alloy for hot and cold working tools. This 5% chrome alloy is a good choice for hot and cold trim dies, shear knives, punches and forging dies.

AISI H-12

53-57 Rc as welded

M-2 SWT

AISI M2 tool steel. For repair of M2 and D2 tool steel. Used in forming dies, knives, shear blades and drills.

AISI M2

60-64 Rc as welded

M-250 SWT

Maraging 250 alloy. This alloy generates deposits that are 30-32 Rc and machinable as welded. Age hardening at 950˚F will increase hardness up to 49-51 Rc. Yield Strength of 250,000 psi.

30-32 Rc as welded

P-20 SWT

AISI P-20 alloy for repair of plastic molds where a color match is needed. Tempers to 30-35 Rc.

S-7 SWT

Shock resistant tool steel that is a "bearcat" on cold applications. Excellent for fabrication and repair of cold working tools including trim dies, cold shear knives and punches.

AISI S-7

54-57 Rc as welded