Home Nickel Forge Cobalt Stainless Low Alloy Hardfacing Tool Steel Electrodes Solid Wire

 

 

COR®MAIN

Ph: 810 - 227 - 3251

Fax: 810 - 227 - 9266 sales@cor-met.com

CORED WIRES FOR PLANT MAINTENANCE

M SERIES FOR PLANT MAINTENANCE AND REPAIR

ALLOY

DESCRIPTION

CLASSIFICATION

PHYSICALS

DATA SHEETS

11 FC Lower cost nickel containing alloy used to repair cast iron. Fe-Ni-Cr
14% alloy
30-35 Rc as welded 11 FC
33 FC 33% Ni alloy used to buildup cast iron and to join cast iron to steel. Fe-Ni-Mn
38% alloy
15-20 Rc as welded 33 FC
3301 FC 36% Ni alloy used to buildup cast iron and to join cast iron steel. Fe-Ni-Mn
42% alloy
15-20 Rc as welded 3301 FC
4130 FC Responds to 4130 quench and temper. Also used as a flame-hardening alloy. AISI 4130 type Dependent on heat treatment flame hardens to 52 Rc 4130 FC
4140 FC Responds to 4140 quench and temper. Also used as a flame-hardening alloy. AISI 4140 type Dependent on heat treatment flame hardens to 56 Rc 4140 FC
4340 FC For repair of 4340 when weld metal must respond to same type of heat-treatment. AISI 4340 type Dependent on heat treatment 4340 FC
55 FC 53% Ni alloy used to join and repair cast iron. Ni-Fe-Mn
56% alloy
15-20 Rc as welded 55 FC
6150 FC Responds to 6150 quench and temper. Mostly used for flame hardening properties. AISI 6150 type Dependent on heat treatment flame hardens to 62 Rc  
68 FC Versatile alloy for joining a variety of tool steels. Retains hardness after tempering when used on alloy steel. Fe-Cr-Ni
15% alloy
40 Rc as welded 160,000 psi tensile. 68 FC
712 FC High Strength and corrosion resistant alloy used for joining dissimilar metals. Fe-Cr-Ni-Mo
40% alloy
20 Rc as welded 120,000 psi tensile.  
8620 FC For repair of 8620 when weld metal must respond to same type of heat-treatment. AISI 8620 type Dependent on heat treatment  
99 MC 99% Ni alloy for joining and overlay of cast iron. 99% Ni 160 BHN as welded 99 MC
F15 FC Excellent combination of strength and toughness. Useful to join high strength low alloy steels. Fe-Ni-Cr-Mo
6% alloy
15-20 Rc as welded 115,000 psi tensile 68% R.A. F15 FC
F25 FC Excellent combination of strength and toughness. Useful to join alloy steels such as 4130, 4140 and wearplate. Fe-Ni-Cr-Mo
8% alloy
25-30 Rc as welded 132,000 psi tensile 60% R.A. F25 FC

 

F35 FC Excellent combination of strength and toughness. Useful to join alloy steels such as 4130, 4140 and wearplate. Fe-Ni-Cr-Mo
10% alloy
32-37 Rc as welded 165,000 psi tensile 52% R.A. F35 FC

sales@cor-met.com